The installation steps of the magnetic lock are as follows:
1. Select the lock position: Determine the installation position of the magnetic lock, usually on the side of the door frame, and keep the magnetic lock aligned with the door lock.
2. Determine the position of the power cable: According to the use of the door lock, select an appropriate position to place the power cable. It is recommended to place the power cable near the power socket to ensure the stability of the power supply.
3. Install the control box: Configure the corresponding control box according to the model of the magnetic lock, and fix it in the position selected by the power cable. Ensure that the control box and its connectors are securely installed.
4. Install magnets: Install magnets on the side of the door (near the side of the magnetic lock), which can be fixed to the door using glue or screws. Pay attention to the alignment between the magnet and the magnetic lock to ensure that the magnetic lock can properly adsorb the magnet.
5. Connect the power cable: Connect the power cable of the magnetic lock to the corresponding socket of the control box. Make sure the power cord is in good contact and will not trip or get stuck.
6. Test lock: Plug in the power supply and confirm that the power indicator of the magnetic lock and control box are on normally. Try to open and close the door with your hand or key, and confirm that the magnetic lock's adsorption and release function is normal.
Please note that before installing a magnetic lock, it is recommended to read and follow the specific steps in the installation instructions and operating instructions. If you have any questions about installation or operation, it is recommended to consult a professional or the technical support of the manufacturer.
